IntroThis body kit is meant to improve aerodynamics on your E70 X5 BMW.Suitable forBMW X5 E70 (2007-2011)Not suitable forBMW X5 E70 LCI (facelift)
BMW X5 E70 M sportDescriptionThis Aerodynamic body kit contains 13 different parts which constitutes add-ons for front and rear bumpers.
All 13 pieces are made of high quality PP (polypropylene).Fitting and InstallationFitting instructions not included.
Installation in an authorized car service is highly recommended!Package ContainsAdd-ons for front and rear bumper (13 pieces)Package dimensionsLength (cm): 125
Width (cm): 17
Height (cm): 47
Weight (kg): 15
CertificatesProduct without E-mark/ABE/TUV.
These are high quality aftermarket parts.
Notice: Undefined index: discount in /home/carpartu/public_html/catalog/config.php on line 20
Notice: Undefined index: tvatimp-07 in /home/carpartu/public_html/catalog/config.php on line 21
Badgeless Front Grille suitable for Audi A5 8T (2007-2011) RS Design Piano Black (CODE: FGAUA58TRSB)
IntroThis front grill is meant to give your car a surprising fresh, fierce and aggressive look. Also this front grille can turn your car into an eye-catcher on the road.Suitable forAudi A5 8T (2007-2011)Not suitable forAudi A5 RS5
Audi A5 Facelift ( 2012-up)DescriptionBadgeless Central Grille
Made from high quality plastic.
Color: Piano Black.Fitting and InstallationFitting instructions not included.
Installation in an authorized car service is highly recommended.Package ContainsBadgeless Front GrillePackage dimensionsLength (cm): 75
Width (cm): 16
Height (cm): 55
Weight (kg): 7
CertificatesProduct without E-mark/ABE/TUV.
These are high quality aftermarket parts.
Audi A5 Facelift ( 2012-up)DescriptionBadgeless Central Grille
Made from high quality plastic.
Color: Piano Black.Fitting and InstallationFitting instructions not included.
Installation in an authorized car service is highly recommended.Package ContainsBadgeless Front GrillePackage dimensionsLength (cm): 75
Width (cm): 16
Height (cm): 55
Weight (kg): 7
CertificatesProduct without E-mark/ABE/TUV.
These are high quality aftermarket parts.
Badgeless Front Grille suitable for Audi A5 8T (2012-2015) RS Design Piano Black (CODE: FGAUA58TFRSB)
IntroThis front grill is meant to give your car a surprising fresh, fierce and aggressive look. Also this front grille can turn your car into an eye-catcher on the road.Suitable forAudi A5 8T Facelift SE (2012-2015) Coupe Sportback Convertible
Audi A5 8T Facelift S-Line (2012-2015) Coupe Sportback Convertible
Audi S5 8T Facelift (2012-2015) Coupe Sportback ConvertibleNot suitable forAudi A5 Pre Facelift (2007-2011)DescriptionBadgeless Central Grille
Made from high quality plastic
Color: Piano Black FinishFitting and InstallationFitting instructions not included.
Installation in an authorized car service is highly recommended.Package ContainsSingle frame grille
European license plate supportPackage dimensionsLength (cm): 75
Width (cm): 16
Height (cm): 55
Weight (kg): 7
CertificatesProduct without E-mark/ABE/TUV.
These are high quality aftermarket parts.
Audi A5 8T Facelift S-Line (2012-2015) Coupe Sportback Convertible
Audi S5 8T Facelift (2012-2015) Coupe Sportback ConvertibleNot suitable forAudi A5 Pre Facelift (2007-2011)DescriptionBadgeless Central Grille
Made from high quality plastic
Color: Piano Black FinishFitting and InstallationFitting instructions not included.
Installation in an authorized car service is highly recommended.Package ContainsSingle frame grille
European license plate supportPackage dimensionsLength (cm): 75
Width (cm): 16
Height (cm): 55
Weight (kg): 7
CertificatesProduct without E-mark/ABE/TUV.
These are high quality aftermarket parts.
Body Kit suitable for BMW 5 Series F10 (2011-2017) M5 Design (CODE: CBBMF10M5)
IntroThis body kit is meant to add a sporty touch, improve aerodynamics.Suitable forBMW 5 Series F10 (2011-2014)
*Can be also fitted on BMW F10 5 Series LCI (2014-up) after replacing the kidney grilles with pre LCI grillesNot suitable forBMW 5 Series F10 528I (2011-up)
BMW 5 Series F11 (2011-up)DescriptionBody kit M5 Design
Front Bumper is equipped with central-lower and side grilles, parking sensor holders (PDC) and headlights washer system covers (SRA).
This bumper is made of high quality PP (polypropylene) and it is prepared for painting operation (primed)
Rear bumper equipped with twin outlet for double exhaust, red reflective accessories and parking sensor holders (PDC).
Rear bumper is made of high quality PP (polypropylene) and it is prepared for painting operation (primed).
Side Skirts is made of high quality PP (polypropylene) and it is prepared for painting operation (primed)Fitting and InstallationFitting instructions not included.
Installation in an authorized car service is highly recommended.Package ContainsFront bumper
Rear bumper
Side skirts (left-right)Package dimensionsLength (cm): 210
Width (cm): 55
Height (cm): 90
Weight (kg): 39
CertificatesProduct without E-mark/ABE/TUV.
These are high quality aftermarket parts.
*Can be also fitted on BMW F10 5 Series LCI (2014-up) after replacing the kidney grilles with pre LCI grillesNot suitable forBMW 5 Series F10 528I (2011-up)
BMW 5 Series F11 (2011-up)DescriptionBody kit M5 Design
Front Bumper is equipped with central-lower and side grilles, parking sensor holders (PDC) and headlights washer system covers (SRA).
This bumper is made of high quality PP (polypropylene) and it is prepared for painting operation (primed)
Rear bumper equipped with twin outlet for double exhaust, red reflective accessories and parking sensor holders (PDC).
Rear bumper is made of high quality PP (polypropylene) and it is prepared for painting operation (primed).
Side Skirts is made of high quality PP (polypropylene) and it is prepared for painting operation (primed)Fitting and InstallationFitting instructions not included.
Installation in an authorized car service is highly recommended.Package ContainsFront bumper
Rear bumper
Side skirts (left-right)Package dimensionsLength (cm): 210
Width (cm): 55
Height (cm): 90
Weight (kg): 39
CertificatesProduct without E-mark/ABE/TUV.
These are high quality aftermarket parts.
Brackets Running Boards Side Steps suitable for MITSUBISHI Outlander III (2012-up) & MITSUBISHI ASX (2010-up) (CODE: BRBMIOU3)
Suitable forMITSUBISHI Outlander III (2012-up)
MITSUBISHI ASX (2010-up)Not suitable forMITSUBISHI Outlander I (2001-2008)
MITSUBISHI Outlander II (2006-2012)
MITSUBISHI ASX (1991-1997)
MITSUBISHI ASX (1997-2002)DescriptionBrackets Running Boards Side Steps
Material : Steel
Attachment Method: Bolt onFitting and InstallationFitting instructions not included.
Installation in an authorized car service is highly recommended.Package ContainsOne set of Brackets
Mount kit only, board sold separatelyCertificatesProduct without E-mark/ABE/TUV.
These are high quality aftermarket parts.Package dimensionsLength (cm): 50
Width (cm): 30
Height (cm): 30
Weight (kg): 5
MITSUBISHI ASX (2010-up)Not suitable forMITSUBISHI Outlander I (2001-2008)
MITSUBISHI Outlander II (2006-2012)
MITSUBISHI ASX (1991-1997)
MITSUBISHI ASX (1997-2002)DescriptionBrackets Running Boards Side Steps
Material : Steel
Attachment Method: Bolt onFitting and InstallationFitting instructions not included.
Installation in an authorized car service is highly recommended.Package ContainsOne set of Brackets
Mount kit only, board sold separatelyCertificatesProduct without E-mark/ABE/TUV.
These are high quality aftermarket parts.Package dimensionsLength (cm): 50
Width (cm): 30
Height (cm): 30
Weight (kg): 5
Brackets Running Boards Side Steps suitable for NISSAN X-Trail III (T32) (2013-Up) (CODE: BRBNIXT3)
Suitable forNISSAN X-Trail III (T32) (2013-Up)Not suitable forNISSAN X-Trail I (T30) (2000-2007)
NISSAN X-Trail II (T31) (2007-2013)DescriptionBrackets Running Boards Side Steps
Material : Steel
Attachment Method: Bolt onFitting and InstallationFitting instructions not included.
Installation in an authorized car service is highly recommended.Package ContainsOne set of Brackets
Mount kit only, board sold separatelyCertificatesProduct without E-mark/ABE/TUV.
These are high quality aftermarket parts.
NISSAN X-Trail II (T31) (2007-2013)DescriptionBrackets Running Boards Side Steps
Material : Steel
Attachment Method: Bolt onFitting and InstallationFitting instructions not included.
Installation in an authorized car service is highly recommended.Package ContainsOne set of Brackets
Mount kit only, board sold separatelyCertificatesProduct without E-mark/ABE/TUV.
These are high quality aftermarket parts.
Brackets Running Boards Side Steps suitable for PEUGEOT 3008 (2009-2016) (CODE: BRBPEUG3008)
Suitable forPEUGEOT 3008 (2009-2016)DescriptionBrackets Running Boards Side Steps
Material : Steel
Attachment Method: Bolt onFitting and InstallationFitting instructions not included.
Installation in an authorized car service is highly recommended.Package ContainsOne set of Brackets
Mount kit only, board sold separatelyCertificatesProduct without E-mark/ABE/TUV.
These are high quality aftermarket parts.
Material : Steel
Attachment Method: Bolt onFitting and InstallationFitting instructions not included.
Installation in an authorized car service is highly recommended.Package ContainsOne set of Brackets
Mount kit only, board sold separatelyCertificatesProduct without E-mark/ABE/TUV.
These are high quality aftermarket parts.
Brackets Running Boards Side Steps suitable for PEUGEOT 4008 (2012-2016) (CODE: BRBPEUG4008)
Suitable forPeugeot 4008 (2012-2016)DescriptionBrackets Running Boards Side Steps
Material : Steel
Attachment Method: Bolt onFitting and InstallationFitting instructions not included.
Installation in an authorized car service is highly recommended.Package ContainsOne set of Brackets
Mount kit only, board sold separatelyCertificatesProduct without E-mark/ABE/TUV.
These are high quality aftermarket parts.
Material : Steel
Attachment Method: Bolt onFitting and InstallationFitting instructions not included.
Installation in an authorized car service is highly recommended.Package ContainsOne set of Brackets
Mount kit only, board sold separatelyCertificatesProduct without E-mark/ABE/TUV.
These are high quality aftermarket parts.
Brackets Running Boards Side Steps suitable for SKODA Yeti (5L) (2009-2017) (CODE: BRBSOYE)
Old DescriptionCompatibilitySuitable for:
Skoda Yeti (5L) (2009-2017)DescriptionMaterial : Steel
Attachment Method: Bolt onPackage ContainsOne set of Brackets
Mount kit only, board sold separatelyCertificatesProduct without E-mark/ABE/TUV.
These are high quality aftermarket parts.
Skoda Yeti (5L) (2009-2017)DescriptionMaterial : Steel
Attachment Method: Bolt onPackage ContainsOne set of Brackets
Mount kit only, board sold separatelyCertificatesProduct without E-mark/ABE/TUV.
These are high quality aftermarket parts.
Cargo mat suitable for MERCEDES Vito short 2014- (CODE: 100945)
Old DescriptionCompatibilitySuitable for: MERCEDES Vito short 2014-DescriptionThis cargo mats are designed and made exactly for the type of your car. Cargo mat perfectly fits the contours floors and protects the original floor against dirt and scratches. With the high quality materials used it can easily be cleaned by conventional detergents. The advantages of Rezaw dedicated cargo mats and floor mats:- perfect dimensional accuracy according to the type of vehicle - made of high quality plastic - anti skid surface - easy maintenance - long life material - customized fixation system - odor free.Package ContainsOne Cargo Mat.CertificatesThese are high quality aftermarket parts.
Central Grille and Side Vents Assembly suitable for Land Range Rover Sport L320 (2005-2008) Autobiography Look Black Silver Edition (CODE: RRFGA01BS)
IntroThis front grille and side vents assembly is meant to give your Range Rover Sport a surprising fresh and noble look.Suitable forLand Range Rover Sport L320 (2005-2008)Not suitable forLand Range Rover Sport L320 Facelift (2009-up)DescriptionSingle Frame Autobiography Design Front Grille
Frame Finish: Piano Black
Inner finish: Silver
Material: High quality ABS plastic
Side Vents Autobiography Design
Frame Finish: Piano Black
Inner finish: Silver
Encrypted "SPORT" on Central Stripe - Silver
Material: High quality ABS plasticFitting and InstallationFitting instructions not included.
Installation in an authorized car service is highly recommended.Package ContainsCentral Grille
Side VentsCertificatesProduct without E-mark/ABE/TUV.
These are high quality aftermarket parts.Package dimensionsLength (cm): 112
Width (cm): 37
Height (cm): 16
Weight (kg): 10
Frame Finish: Piano Black
Inner finish: Silver
Material: High quality ABS plastic
Side Vents Autobiography Design
Frame Finish: Piano Black
Inner finish: Silver
Encrypted "SPORT" on Central Stripe - Silver
Material: High quality ABS plasticFitting and InstallationFitting instructions not included.
Installation in an authorized car service is highly recommended.Package ContainsCentral Grille
Side VentsCertificatesProduct without E-mark/ABE/TUV.
These are high quality aftermarket parts.Package dimensionsLength (cm): 112
Width (cm): 37
Height (cm): 16
Weight (kg): 10
Central Grilles Kidney Grilles suitable for BMW X1 E84 (2009-2014) Piano Black Double Stripe Design (CODE: FGBME84DPB)
IntroThe new model of central grilles is meant to bring your BMW an aggressive and exclusive look.Suitable forBMW X1 E84 (2009-2014)DescriptionCentral grilles are crafted in high quality plastics
Finish: Piano BlackFitting and InstallationFitting instructions not included.
Installation in an authorized car service is highly recommended.Package ContainsOne set of central grilles (2 pieces)Package dimensionsLength (cm): 37
Width (cm): 32
Height (cm): 8
Weight (kg): 5
CertificatesProduct without E-mark/ABE/TUV.
These are high quality aftermarket parts.
Finish: Piano BlackFitting and InstallationFitting instructions not included.
Installation in an authorized car service is highly recommended.Package ContainsOne set of central grilles (2 pieces)Package dimensionsLength (cm): 37
Width (cm): 32
Height (cm): 8
Weight (kg): 5
CertificatesProduct without E-mark/ABE/TUV.
These are high quality aftermarket parts.
Chrome Parts Trim Strips Side Skirts suitable for Mercedes S-Class W222 (2013-2020) S65 S63 Design (CODE: SSCMBW222AMGS65)
IntroThese Chrome Parts Trim Strips are meant to replace the one from your Mercedes S-Class W222.Suitable forMercedes S-Class W222 Long Wheel Base (2013-2020)Not suitable forMercedes S-Class W222 Short Wheel Base (2013-up)
Mercedes S-Class W222 Standard Edition
Mercedes S-Class W222 S65/S63 AMGDescriptionChrome Strips Side Skirts Moldings
Easy to mount: Just fix the ornaments on your Side SkirtsFitting and InstallationFitting instructions not included.
Installation in an authorized car service is highly recommended.Package ContainsOne set of Chrome Strips Side Skirts (left/right)
* Side Skirts not includedPackage dimensionsLength (cm): 180
Width (cm): 15
Height (cm): 15
Weight (kg): 2
CertificatesProduct without E-mark/ABE/TUV.
These are high quality aftermarket parts.
Mercedes S-Class W222 Standard Edition
Mercedes S-Class W222 S65/S63 AMGDescriptionChrome Strips Side Skirts Moldings
Easy to mount: Just fix the ornaments on your Side SkirtsFitting and InstallationFitting instructions not included.
Installation in an authorized car service is highly recommended.Package ContainsOne set of Chrome Strips Side Skirts (left/right)
* Side Skirts not includedPackage dimensionsLength (cm): 180
Width (cm): 15
Height (cm): 15
Weight (kg): 2
CertificatesProduct without E-mark/ABE/TUV.
These are high quality aftermarket parts.
Complete Body Kit suitable for BMW E36 3 Series (1992-1998) M3 Design (CODE: COCBBME36MD)
IntroThis body kit is meant to add a sporty touch on you BMW E36 and convert it into an genuine M3 model.Suitable forBMW E36 3 Series Sedan Coupe Cabrio (1992-1998)Not suitable forBMW E36 Compact (1992-1998)
BMW E36 Touring (1992-1998)DescriptionBody kit
Front bumper equiped with central lower grille and front bumper pannels
Spoiler Valance crafted in high quality polypropylene
The air diffuser does not require priming and painting
Side Skirts are crafted in high quality polypropylene
Without fitting accesories
Front bumper, rear diffuser and side skirts are crafted in high quality polypropyleneFitting and InstallationFitting instructions not included.
Installation in an authorized car service is highly recommended!Package ContainsFront Bumper
Rear Diffuser
Side Skirts (left-right)CertificatesProduct without E-mark/ABE/TUV.
These are high quality aftermarket parts.
BMW E36 Touring (1992-1998)DescriptionBody kit
Front bumper equiped with central lower grille and front bumper pannels
Spoiler Valance crafted in high quality polypropylene
The air diffuser does not require priming and painting
Side Skirts are crafted in high quality polypropylene
Without fitting accesories
Front bumper, rear diffuser and side skirts are crafted in high quality polypropyleneFitting and InstallationFitting instructions not included.
Installation in an authorized car service is highly recommended!Package ContainsFront Bumper
Rear Diffuser
Side Skirts (left-right)CertificatesProduct without E-mark/ABE/TUV.
These are high quality aftermarket parts.
Complete Body Kit suitable for Toyota Land Cruiser V8 FJ200 (2015-up) (CODE: CBTOLCFJ200)
IntroThis body kit is meant to improve the look of your Land Cruiser.Suitable forToyota Land Cruiser FJ200 (2015-up)Not suitable forToyota Land Cruiser (2008-2014)DescriptionComplete Body Kit Toyota Land Cruiser
Front Bumper Spoiler equipped with LED DRL
Rear Bumper equipped with red reflective accessories
Trunk Spoiler equipped with LED LightBar Brake light
Exhaust Pipes Muffler Tips crafted in high quality 304 Stainless Steel
The body kit is crafted in high quality polypropylene
Finish: Pearled WhiteFitting and InstallationFitting instructions not included
Installation in an authorized car service is highly recommendedPackage ContainsFront Bumper Spoiler equipped with LED LightBar DRL
Rear Bumper equipped with red refflective accesories
Trunk Spoiler equipped with LED LightBar Brake Light
Exhaust Tips Muffler TipsPackage dimensionsLength (cm): 180
Width (cm): 55
Height (cm): 60
Weight (kg): 25
CertificatesProduct without E-mark/ABE/TUV.
These are high quality aftermarket parts.
Front Bumper Spoiler equipped with LED DRL
Rear Bumper equipped with red reflective accessories
Trunk Spoiler equipped with LED LightBar Brake light
Exhaust Pipes Muffler Tips crafted in high quality 304 Stainless Steel
The body kit is crafted in high quality polypropylene
Finish: Pearled WhiteFitting and InstallationFitting instructions not included
Installation in an authorized car service is highly recommendedPackage ContainsFront Bumper Spoiler equipped with LED LightBar DRL
Rear Bumper equipped with red refflective accesories
Trunk Spoiler equipped with LED LightBar Brake Light
Exhaust Tips Muffler TipsPackage dimensionsLength (cm): 180
Width (cm): 55
Height (cm): 60
Weight (kg): 25
CertificatesProduct without E-mark/ABE/TUV.
These are high quality aftermarket parts.
Complete Body Kit suitable for Toyota Land Cruiser V8 FJ200 (2015-up) with Running Boards (CODE: COCBTOLCFJ200)
IntroThis body kit is meant to improve the look of your Land Cruiser.Suitable forToyota Land Cruiser FJ200 (2015-up)Not suitable forToyota Land Cruiser (2008-2014)DescriptionComplete Body Kit Toyota Land Cruiser
Front Bumper Spoiler equipped with LED DRL.
Rear Bumper equipped with red reflective accessories
Trunk Spoiler equipped with LED LightBar Brake light
Exhaust Pipes Muffler Tips crafted in high quality 304 Stainless Steel
The body kit is crafted in high-quality polypropylene.
Finish: Pearled White.
Running boards are crafted in high quality 304 stainless steel, aluminum and Polypropylene
These are equipped with anti-slip rubber material.
Professional fitting is mandatoryFitting and InstallationFitting instructions not included.
Installation in an authorized car service is highly recommended.Package ContainsFront Bumper
Rear Bumper
Trunk Spoiler
Exhaust Tips Muffler Tips (left-right)
One set of Running Boards (left-right)Package dimensionsLength (cm): 210
Width (cm): 70
Height (cm): 65
Weight (kg): 50
CertificatesProduct without E-mark/ABE/TUV.
These are high quality aftermarket parts.
Front Bumper Spoiler equipped with LED DRL.
Rear Bumper equipped with red reflective accessories
Trunk Spoiler equipped with LED LightBar Brake light
Exhaust Pipes Muffler Tips crafted in high quality 304 Stainless Steel
The body kit is crafted in high-quality polypropylene.
Finish: Pearled White.
Running boards are crafted in high quality 304 stainless steel, aluminum and Polypropylene
These are equipped with anti-slip rubber material.
Professional fitting is mandatoryFitting and InstallationFitting instructions not included.
Installation in an authorized car service is highly recommended.Package ContainsFront Bumper
Rear Bumper
Trunk Spoiler
Exhaust Tips Muffler Tips (left-right)
One set of Running Boards (left-right)Package dimensionsLength (cm): 210
Width (cm): 70
Height (cm): 65
Weight (kg): 50
CertificatesProduct without E-mark/ABE/TUV.
These are high quality aftermarket parts.
Complete Conversion Body Kit suitable for Land Rover Discovery 3 L319 (2004-2009) to Discovery 4 Facelift (CODE: COCBLRD4)
IntroThis complete conversion body kit is meant to transform and upgrade your Land Rover Discovery 3 in the new Discovery 4 Facelift.Suitable forLand Rover Discovery 3 L319 (2004-2009) for mounting requires resistors WH 25 15R 5% (not included in the package)
*only for Left Hand Drive (LHD)Not suitable forLand Rover Discovery 3 (2004-2009) equipped with AFS Head Lights
Land Rover Discovery 3 Right Hand Drive (RHD)DescriptionThis bumper has holes for parking sensors / fog lamps and headlamp washers, NOT any holes for front cameras ( used if you have the 360 Deg camera )
Made of high quality PP (polypropylene)
Central Grille
Frame Finish: Piano Black
Inner Finish: Silver
Material: High quality ABS plastic
Side Vents
Frame Finish: Silver
Inner finish: Silver
Material: High quality ABS plastic
Front Fenders crafted in high quality steel.
Xenon Headlights equipped with Bi-Xenon and Xenon Ballasts and bulbs.
HID Xenon D3S 35 W
LED strip
NON-AFS light
LED Taillights
High Intensity/brightness with Low Power (wattage) draw
Shock & Vibration Resistant
Low Heat Generation
Monochromatic (pure) Colour
Position light: LED
Turning light: LED
Brake light: Bulb
Reverse light: Bulb
Installing on Land Rover Range Rover Discovery 3 (2004-2009) requires Resistors WH 25 15R 5% (not included in the package).Fitting and InstallationFitting instructions not included.
Installation in an authorized car service is highly recommended.Package Contains1 Front bumper
2 Front bumper brackets
2 Wings/Fenders
2 Front wheel Arches
2 Rear door arches
2 Rear wheel arches
2 Fog lights
2 Fog light grille
1 Front grille
2 Side vents
1 Splitter
2 Headlights
2 TaillightsCertificatesProduct without E-mark/ABE/TUV.
These are high quality aftermarket parts.
*only for Left Hand Drive (LHD)Not suitable forLand Rover Discovery 3 (2004-2009) equipped with AFS Head Lights
Land Rover Discovery 3 Right Hand Drive (RHD)DescriptionThis bumper has holes for parking sensors / fog lamps and headlamp washers, NOT any holes for front cameras ( used if you have the 360 Deg camera )
Made of high quality PP (polypropylene)
Central Grille
Frame Finish: Piano Black
Inner Finish: Silver
Material: High quality ABS plastic
Side Vents
Frame Finish: Silver
Inner finish: Silver
Material: High quality ABS plastic
Front Fenders crafted in high quality steel.
Xenon Headlights equipped with Bi-Xenon and Xenon Ballasts and bulbs.
HID Xenon D3S 35 W
LED strip
NON-AFS light
LED Taillights
High Intensity/brightness with Low Power (wattage) draw
Shock & Vibration Resistant
Low Heat Generation
Monochromatic (pure) Colour
Position light: LED
Turning light: LED
Brake light: Bulb
Reverse light: Bulb
Installing on Land Rover Range Rover Discovery 3 (2004-2009) requires Resistors WH 25 15R 5% (not included in the package).Fitting and InstallationFitting instructions not included.
Installation in an authorized car service is highly recommended.Package Contains1 Front bumper
2 Front bumper brackets
2 Wings/Fenders
2 Front wheel Arches
2 Rear door arches
2 Rear wheel arches
2 Fog lights
2 Fog light grille
1 Front grille
2 Side vents
1 Splitter
2 Headlights
2 TaillightsCertificatesProduct without E-mark/ABE/TUV.
These are high quality aftermarket parts.
Complete Conversion Body Kit suitable for Land Rover Discovery 3 to Discovery 4 Facelift (CODE: CBLRD4)
IntroThis complete conversion body kit is meant to transform and upgrade your Land Rover Discovery 3 in the new Discovery 4 Facelift.Suitable forLand Rover Discovery 3 (2004-2009)
*only for Left Hand Drive (LHD)Not suitable forLand Rover Discovery 3 (2004-2009) equipped with AFS Head Lights
Land Rover Discovery 3 Right Hand Drive (RHD)DescriptionComplete Conversion Body Kit Facelift Design
Front bumper has holes for parking sensors / fog lamps and headlamp washers but NOT any holes for front cameras ( used if you have the 360 Deg camera )
Made of high quality PP (polypropylene)
Central Grille
Frame Finish: Piano Black
Inner Finish: Silver
Material: High quality ABS plastic
Side Vents
Frame Finish: Silver
Inner finish: Silver
Material: High quality ABS plastic
Front Fenders crafted in high quality steel
Xenon Headlights equipped with Bi-Xenon and Xenon Ballasts and bulbs
HID Xenon D3S 35 W
LED strip
NON-AFS light
Rear bumper it is equiped with PDC holders and towing cap (Tow Eye Cover Panel)
Rear bumper does not come with red reflective accesories
Rear bumper made of high quality PP (polypropylene)Fitting and InstallationInstalling instructions not provided.
We highly recommend installing the kit in a specialized and authorized service!Package Contains1 Front Bumper
2 Front bumper Brackets
2 Wings/Fenders
2 Front wheel Arches
2 Rear door arches
2 Rear wheel arches
2 Fog lights
2 Fog light grille
1 Front grille
2 Side vents
1 Splitter
2 Front Headlights
1 Rear bumperPackage dimensionsLength (cm): 207
Width (cm): 64
Height (cm): 69
Weight (kg): 45
CertificatesProduct without E-mark/ABE/TUV.
These are high quality aftermarket parts.
*only for Left Hand Drive (LHD)Not suitable forLand Rover Discovery 3 (2004-2009) equipped with AFS Head Lights
Land Rover Discovery 3 Right Hand Drive (RHD)DescriptionComplete Conversion Body Kit Facelift Design
Front bumper has holes for parking sensors / fog lamps and headlamp washers but NOT any holes for front cameras ( used if you have the 360 Deg camera )
Made of high quality PP (polypropylene)
Central Grille
Frame Finish: Piano Black
Inner Finish: Silver
Material: High quality ABS plastic
Side Vents
Frame Finish: Silver
Inner finish: Silver
Material: High quality ABS plastic
Front Fenders crafted in high quality steel
Xenon Headlights equipped with Bi-Xenon and Xenon Ballasts and bulbs
HID Xenon D3S 35 W
LED strip
NON-AFS light
Rear bumper it is equiped with PDC holders and towing cap (Tow Eye Cover Panel)
Rear bumper does not come with red reflective accesories
Rear bumper made of high quality PP (polypropylene)Fitting and InstallationInstalling instructions not provided.
We highly recommend installing the kit in a specialized and authorized service!Package Contains1 Front Bumper
2 Front bumper Brackets
2 Wings/Fenders
2 Front wheel Arches
2 Rear door arches
2 Rear wheel arches
2 Fog lights
2 Fog light grille
1 Front grille
2 Side vents
1 Splitter
2 Front Headlights
1 Rear bumperPackage dimensionsLength (cm): 207
Width (cm): 64
Height (cm): 69
Weight (kg): 45
CertificatesProduct without E-mark/ABE/TUV.
These are high quality aftermarket parts.
Complete Conversion Retrofit Body Kit suitable for Land Range Rover Sport L320 Facelift (2009-2013) Autobiography Design (CODE: COCBRRSBR)
IntroAutobiography Design body kit is meant to give your Range Rover Sport a surprising fresh and noble look.Suitable forLand Range Rover Sport L320 Facelift (2009-2013)
Land Range Rover Sport L320 (2005-2009) require additional fittings and can be mounted only in complete conversionNot suitable forLand Range Rover Sport L320 (2005-2009) plug&play
Land Range Rover Sport L320 with AFSDescriptionAutobiography Design Body Kit
Front Bumper equipped with license plate support and fog lamps cases and fog lamps.
Single Frame Autobiography Design Front Grille
Frame Finish: Piano Black
Inner Finish: Piano Black with Red Insertion
Material: High quality ABS plastic
Side Vents Autobiography Design
Frame Finish: Piano Black
Inner finish: Piano Black
Encrypted Central Stripe Red
Material: High quality ABS plastic
Facelift Headlights for Range Rover Sport equipped with LED Daytime Running Lights.
Headlights are equipped with D3S Xenon Bulb and Xenon Ballast.
Bi-Xenon Low/High Beam
Steering Light Halogen
Turning Lights Halogen
Position Light LED
Headlights are not equipped with self-adjustment module.
Can be adjusted using manual adjustment system.
The roof spoiler is equipped with LED Brake Light Lamp
The roof spoiler is also equipped with support for Reverse Camera System *Reverse Camera is not included
The roof spoiler is prepared for painting process (primed)
Rear Bumper equipped with air diffuser and muffler tips
Front and rear bumper are equipped with parking sensors (PDC) holders.
Front and rear bumper crafted in high quality PP (polypropylene), ready for painting operation (primed)
Muffler tips crafted in high quality stainless steel.
Front Fenders Facelift crafted in high quality steel.
Range Rover Sport Facelift LED Taillights
Position Light: LED
Brake Light: LED
Turning Light: LED
Fog Light: Halogen Bulb
Reverse Light: halogen Bulb
Color: Red/Black with clear glass
For some Range Rover Sport L320 (2005-2009) models flasher relay might click too fast and this can make the indicator lights flash too fast. The 15 Ohm resistor is needed to be mounted on the taillights. 15 Ohm resistor will not get hot and will work fine. The resistors are not included.
KITT Resistor code: WH25-15RJIFitting and InstallationFitting instructions not included.
Installation in an authorized car service is highly recommended.
For Land Range Rover Sport L320 (2005-2009) required additional fittings (without beying limited at):
Headlights washer jets 1x HLWJRRSL320
Headlights washing system adapters from 8 to 5 mm
PDC Parking Sensor 4x PDCRRSL320
Adaptor Conversion Wire for PDC Parking Sensor 4x PDCWRRSL320
Headlights Bracket 1x BRHLRRSFOE
Front bumper/wing Bracket 1x BRFFRRS
Wire loom for fog lights and PDC sensors (front and rear)
PY24W bulbs for Headlights
Resistor for RR Sport Taillights 1x WH25-15RJI (if needed)
Drilling new mounting points for roof spoilerPackage ContainsFront Bumper
Fog Lights
Central Grille
Side Grilles
Rear Bumper
Muffler Tips
LED Brake Light Lamp
Front Fenders
One set of Headlights (left-right)
D3S Xenon Bulb and Xenon Ballast
One set of Taillights (left-right)CertificatesProduct without E-mark/ABE/TUV.
These are high quality aftermarket parts.
Land Range Rover Sport L320 (2005-2009) require additional fittings and can be mounted only in complete conversionNot suitable forLand Range Rover Sport L320 (2005-2009) plug&play
Land Range Rover Sport L320 with AFSDescriptionAutobiography Design Body Kit
Front Bumper equipped with license plate support and fog lamps cases and fog lamps.
Single Frame Autobiography Design Front Grille
Frame Finish: Piano Black
Inner Finish: Piano Black with Red Insertion
Material: High quality ABS plastic
Side Vents Autobiography Design
Frame Finish: Piano Black
Inner finish: Piano Black
Encrypted Central Stripe Red
Material: High quality ABS plastic
Facelift Headlights for Range Rover Sport equipped with LED Daytime Running Lights.
Headlights are equipped with D3S Xenon Bulb and Xenon Ballast.
Bi-Xenon Low/High Beam
Steering Light Halogen
Turning Lights Halogen
Position Light LED
Headlights are not equipped with self-adjustment module.
Can be adjusted using manual adjustment system.
The roof spoiler is equipped with LED Brake Light Lamp
The roof spoiler is also equipped with support for Reverse Camera System *Reverse Camera is not included
The roof spoiler is prepared for painting process (primed)
Rear Bumper equipped with air diffuser and muffler tips
Front and rear bumper are equipped with parking sensors (PDC) holders.
Front and rear bumper crafted in high quality PP (polypropylene), ready for painting operation (primed)
Muffler tips crafted in high quality stainless steel.
Front Fenders Facelift crafted in high quality steel.
Range Rover Sport Facelift LED Taillights
Position Light: LED
Brake Light: LED
Turning Light: LED
Fog Light: Halogen Bulb
Reverse Light: halogen Bulb
Color: Red/Black with clear glass
For some Range Rover Sport L320 (2005-2009) models flasher relay might click too fast and this can make the indicator lights flash too fast. The 15 Ohm resistor is needed to be mounted on the taillights. 15 Ohm resistor will not get hot and will work fine. The resistors are not included.
KITT Resistor code: WH25-15RJIFitting and InstallationFitting instructions not included.
Installation in an authorized car service is highly recommended.
For Land Range Rover Sport L320 (2005-2009) required additional fittings (without beying limited at):
Headlights washer jets 1x HLWJRRSL320
Headlights washing system adapters from 8 to 5 mm
PDC Parking Sensor 4x PDCRRSL320
Adaptor Conversion Wire for PDC Parking Sensor 4x PDCWRRSL320
Headlights Bracket 1x BRHLRRSFOE
Front bumper/wing Bracket 1x BRFFRRS
Wire loom for fog lights and PDC sensors (front and rear)
PY24W bulbs for Headlights
Resistor for RR Sport Taillights 1x WH25-15RJI (if needed)
Drilling new mounting points for roof spoilerPackage ContainsFront Bumper
Fog Lights
Central Grille
Side Grilles
Rear Bumper
Muffler Tips
LED Brake Light Lamp
Front Fenders
One set of Headlights (left-right)
D3S Xenon Bulb and Xenon Ballast
One set of Taillights (left-right)CertificatesProduct without E-mark/ABE/TUV.
These are high quality aftermarket parts.
Complete Mirror Assembly suitable for Mercedes C-Class W204 (2007-2012) Facelift Design (CODE: CMAMBW204F)
IntroThis mirror system is meant to bring your Mercedes a new, fresh and exclusive Design.Suitable forMercedes C-Class W204 (2007-2014)
Memory Function
Heating Function
Auto Adjust in Reverse Mode (Mirror Down)
Folding Mirror FunctionDescriptionComplete Mirror Assembly, sporty looking, Facelift Design equipped with:
Arrow LED Turning Lights
Motor for Electrical Adjustment.
Mirror glasses are equipped with heating system.
Folding Mirror Function
Mirror covers are unpaintedFitting and InstallationFitting instructions not included.
Installation in an authorized car service is highly recommended.Package ContainsComplete Mirrors Assembly (left-right)CertificatesProduct without E-mark/ABE/TUV.
These are high quality aftermarket parts.Package dimensionsLength (cm): 60
Width (cm): 30
Height (cm): 30
Weight (kg): 9
Memory Function
Heating Function
Auto Adjust in Reverse Mode (Mirror Down)
Folding Mirror FunctionDescriptionComplete Mirror Assembly, sporty looking, Facelift Design equipped with:
Arrow LED Turning Lights
Motor for Electrical Adjustment.
Mirror glasses are equipped with heating system.
Folding Mirror Function
Mirror covers are unpaintedFitting and InstallationFitting instructions not included.
Installation in an authorized car service is highly recommended.Package ContainsComplete Mirrors Assembly (left-right)CertificatesProduct without E-mark/ABE/TUV.
These are high quality aftermarket parts.Package dimensionsLength (cm): 60
Width (cm): 30
Height (cm): 30
Weight (kg): 9
D1S Xenon Bulbs 4300K (CODE: XenD1S43K)
Old DescriptionD1S bulbs are meant to replace the burnt bulbs of your vehicle.
CompatibilitySuitable for all vehicles equipped with D1S Xenon bulbs.DescriptionD1S Bulbs 4300K
Power:35W
Color: 4300KPachetul Contine2x D1S Xenon BulbsCertificatesProduct without E-mark/ABE/TUV.
These are high quality aftermarket parts.
CompatibilitySuitable for all vehicles equipped with D1S Xenon bulbs.DescriptionD1S Bulbs 4300K
Power:35W
Color: 4300KPachetul Contine2x D1S Xenon BulbsCertificatesProduct without E-mark/ABE/TUV.
These are high quality aftermarket parts.
D1S Xenon Bulbs 8000K (CODE: XenD1S8K)
Old DescriptionD1S bulbs are meant to replace the burnt bulbs of your vehicle.
CompatibilitySuitable for all vehicles equipped with D1S Xenon bulbs.DescriptionD1S Bulbs 8000K
Power:35W
Color: 8000KPachetul Contine2x D1S Xenon BulbsCertificatesProduct without E-mark/ABE/TUV.
These are high quality aftermarket parts.
CompatibilitySuitable for all vehicles equipped with D1S Xenon bulbs.DescriptionD1S Bulbs 8000K
Power:35W
Color: 8000KPachetul Contine2x D1S Xenon BulbsCertificatesProduct without E-mark/ABE/TUV.
These are high quality aftermarket parts.
D2R Xenon Bulbs 10000K (CODE: XenD2R10K)
Old DescriptionD2R bulbs are meant to replace the burnt bulbs of your vehicle.
CompatibilitySuitable for all vehicles equipped with D2R Xenon bulbs.DescriptionD2R Bulbs 10000K
Power:35W
Color: 10000KPachetul Contine2x D2R Xenon Bulbs
CertificatesProduct without E-mark/ABE/TUV.
These are high quality aftermarket parts.
CompatibilitySuitable for all vehicles equipped with D2R Xenon bulbs.DescriptionD2R Bulbs 10000K
Power:35W
Color: 10000KPachetul Contine2x D2R Xenon Bulbs
CertificatesProduct without E-mark/ABE/TUV.
These are high quality aftermarket parts.
D2R Xenon Bulbs 6000K (CODE: XenD2R6K)
DescriptionD2R bulbs are meant to replace the burnt bulbs of your vehicle.
CompatibilitySuitable for all vehicles equipped with D2R Xenon bulbs.DescriptionD2R Bulbs 6000K
Power:35W
Color: 6000KPachetul Contine2x D2R Xenon BulbsCertificatesProduct without E-mark/ABE/TUV.
These are high quality aftermarket parts.
CompatibilitySuitable for all vehicles equipped with D2R Xenon bulbs.DescriptionD2R Bulbs 6000K
Power:35W
Color: 6000KPachetul Contine2x D2R Xenon BulbsCertificatesProduct without E-mark/ABE/TUV.
These are high quality aftermarket parts.
DAYLINE Headlights LED suitable for Seat Ibiza 6L (04.2002-2008) DRL Black (CODE: SWSI05GXB)
IntroThese headlights are meant to improve the design of your Seat and increase road security.Suitable forSeat Ibiza 6L (04.2002-2008)DescriptionVersion: Black
Position: LED
Signaling: P21W
Low beam: H1 included
High beam: H1 included
Adjustment: electric (adjustment motor not included)Fitting and InstallationFitting instructions not included.
Installation in an authorized car service is highly recommended.Package ContainsOne set of Headlights (left-right)Package dimensionsLength (cm): 70
Width (cm): 30
Height (cm): 50
Weight (kg): 10
CertificatesCertificate E-Mark
These are high quality aftermarket parts.
Position: LED
Signaling: P21W
Low beam: H1 included
High beam: H1 included
Adjustment: electric (adjustment motor not included)Fitting and InstallationFitting instructions not included.
Installation in an authorized car service is highly recommended.Package ContainsOne set of Headlights (left-right)Package dimensionsLength (cm): 70
Width (cm): 30
Height (cm): 50
Weight (kg): 10
CertificatesCertificate E-Mark
These are high quality aftermarket parts.
Daytime running lights 20 leds (CODE: NS-820)
Old DescriptionDaytime running lights equipped with 20 LEDs.
E4/R87 Approval.
Dimensions:22/26/32mm.CertificatesThese are high quality aftermarket parts.
E4/R87 Approval.
Dimensions:22/26/32mm.CertificatesThese are high quality aftermarket parts.
Notice: Undefined index: nume_produs in /home/carpartu/public_html/_core.php on line 715
Notice: Undefined index: image in /home/carpartu/public_html/_core.php on line 718
Notice: Undefined index: id_produs in /home/carpartu/public_html/_core.php on line 727
Notice: Undefined index: id_image in /home/carpartu/public_html/_core.php on line 727
Exhaust Muffler Tips suitable for BMW 5 Series Sedan Touring F10 F11 F18 (2011-2017) 550i V8 LCI Square Design Black Edition (CODE: TY-D047B)
IntroThis muffler tips system is meant to complete the exclusive design of your BMW 5 Series and convert into the 550i LCI.Suitable forBMW 5 Series F10 F11 F18 (2011-2017)
BMW 5 Series F10 F11 F18 535D 535I
Can be fitted also on other BMW models.DescriptionExhaust Muffler Tips
Muffler Tips Exhaust is crafted in high quality 304 stainless steel.
Design: 550i V8 LCI Square
Dimensions:
Diameter: 70mm
Length: 140mm
Width: 187mmFitting and InstallationFitting instructions not included.
Installation in an authorized car service is highly recommended.Package ContainsOne set exhaust muffler tips (left+right)
Metal bracketsPackage dimensionsLength (cm): 35
Width (cm): 26
Height (cm): 12
Weight (kg): 3
CertificatesProduct without E-mark/ABE/TUV.
These are high quality aftermarket parts.
BMW 5 Series F10 F11 F18 535D 535I
Can be fitted also on other BMW models.DescriptionExhaust Muffler Tips
Muffler Tips Exhaust is crafted in high quality 304 stainless steel.
Design: 550i V8 LCI Square
Dimensions:
Diameter: 70mm
Length: 140mm
Width: 187mmFitting and InstallationFitting instructions not included.
Installation in an authorized car service is highly recommended.Package ContainsOne set exhaust muffler tips (left+right)
Metal bracketsPackage dimensionsLength (cm): 35
Width (cm): 26
Height (cm): 12
Weight (kg): 3
CertificatesProduct without E-mark/ABE/TUV.
These are high quality aftermarket parts.
Exhaust Muffler Tips suitable for Mercedes GLC 45 X253 C253 GLE SUV W166 Coupe C292 450 C-Class W205 C43 Sport Design (CODE: TY-GLE450)
IntroThese muffler tips are meant to change the look of your Mercedes GLC, GLE SUV & Coupe C292 or C-Class W205 equipped with Sport Package into the C43 Design Sport LookSuitable forMercedes C Class W205 A205 C205 S205 (2014-2017) equipped with Sport AMG Line Bumper
Mercedes GLE Coupe C292 (2015-2017) equipped with Sport AMG Line Bumper
Mercedes GLE SUV W166 (2015-2017) equipped with Sport AMG Line Bumper
Mercedes GLC W253 X253 C253 (2015-2017) equipped with Sport AMG Line BumperNot suitable forMercedes equipped with Standard rear bumperDescriptionMuffler tips
Muffler tips are crafted in high quality polished 304 stainless steel.Fitting and InstallationFitting instructions not included.
Installation in an authorized car service is highly recommended.Package ContainsOne set of muffler tips (left-right)Package dimensionsLength (cm): 60
Width (cm): 52
Height (cm): 53
Weight (kg): 5
CertificatesProduct without E-mark/ABE/TUV.
These are high quality aftermarket parts.
Mercedes GLE Coupe C292 (2015-2017) equipped with Sport AMG Line Bumper
Mercedes GLE SUV W166 (2015-2017) equipped with Sport AMG Line Bumper
Mercedes GLC W253 X253 C253 (2015-2017) equipped with Sport AMG Line BumperNot suitable forMercedes equipped with Standard rear bumperDescriptionMuffler tips
Muffler tips are crafted in high quality polished 304 stainless steel.Fitting and InstallationFitting instructions not included.
Installation in an authorized car service is highly recommended.Package ContainsOne set of muffler tips (left-right)Package dimensionsLength (cm): 60
Width (cm): 52
Height (cm): 53
Weight (kg): 5
CertificatesProduct without E-mark/ABE/TUV.
These are high quality aftermarket parts.
Exhaust Muffler Tips suitable for Porsche Cayenne 92A V6 V8 Petrol (05.2010-09.2014) GTS Design Silver (CODE: TY-D054)
IntroThis muffler tips system is meant to complete the exclusive design of your Porsche Cayenne.Suitable forPorsche Cayenne 92A V6 V8 Petrol (05.2010-09.2014)
Porsche Cayenne 92A (05/2010-09/2014) HybridNot suitable forPorsche Cayenne 92A V6 V8 Diesel (05.2010-09.2014)
Porsche Cayenne GTS
Porsche Cayenne S
Porsche Cayenne 92A Facelift (10/2014-2017)DescriptionExhaust Muffler Tips Brushed Aluminum Powder Finish
These muffler tips are crafted in high quality 304 stainless steel and are equipped with plastic Insertions.
The price is displayed for a set (left-right)
Dimensions:
Terminal End Pipe: 70mm
Length: 355mm
Width: 185mm
Height: 90mmFitting and InstallationFitting instructions not included.
Installation in an authorized car service is highly recommended. This system must be welded on the original exhaust system.Package ContainsOne set of muffler tips (left, right)Package dimensionsLength (cm): 73
Width (cm): 52
Height (cm): 25
Weight (kg): 7
CertificatesProduct without E-mark/ABE/TUV.
These are high quality aftermarket parts.
Porsche Cayenne 92A (05/2010-09/2014) HybridNot suitable forPorsche Cayenne 92A V6 V8 Diesel (05.2010-09.2014)
Porsche Cayenne GTS
Porsche Cayenne S
Porsche Cayenne 92A Facelift (10/2014-2017)DescriptionExhaust Muffler Tips Brushed Aluminum Powder Finish
These muffler tips are crafted in high quality 304 stainless steel and are equipped with plastic Insertions.
The price is displayed for a set (left-right)
Dimensions:
Terminal End Pipe: 70mm
Length: 355mm
Width: 185mm
Height: 90mmFitting and InstallationFitting instructions not included.
Installation in an authorized car service is highly recommended. This system must be welded on the original exhaust system.Package ContainsOne set of muffler tips (left, right)Package dimensionsLength (cm): 73
Width (cm): 52
Height (cm): 25
Weight (kg): 7
CertificatesProduct without E-mark/ABE/TUV.
These are high quality aftermarket parts.
ADD TO CART
SHARE
All products
All rights reserved. KITT TUNING